Fuel Tank Filler Pipe (G2271290): Installation

WARNING: This page is about a different variant/trim than selected.

- Install the fuel tank filler pipe.
- Secure the clip.
- Install and tighten the 2 fuel tank filler pipe retaining bolts.
  Torque : 7 Nm
Connect the breather pipe.
Install and tighten the fuel tank filler pipe retaining nut.
Torque : 7 Nm
- Install the hose to the fuel tank filler pipe.
- Secure the clamp.
  Torque : 3.5 Nm
- Connect the hose to the fuel tank.
- Secure the clamp.
  Torque : 3.5 Nm
Install the rear right wheel arch liner.
Refer to: REAR WHEEL ARCH LINER
Refill the fuel tank.
Connect the 12V system.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT