Electronic Engine Controls - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2006487): Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT |
|---|---|---|
| Exhaust camshaft position sensor retaining bolt. | 8 | 6 |
| Intake camshaft position sensor retaining bolt. | 8 | 6 |
| Crankshaft position (CKP) sensor retaining bolt. | 8 | 6 |
| Manifold absolute pressure (MAP) sensor retaining bolt. | 4 | 3 |
| Mass air flow (MAF) sensor retaining screws. | 2 | 1.5 |
| Front knock sensor retaining bolt. | 20 | 15 |
| Rear knock sensor retaining bolt. | 20 | 15 |
| Cylinder block temperature sensor | 11 | 8 |
| Cylinder head temperature sensor | 11 | 8 |
| Heated oxygen sensor(s) (HO2S) | 48 | 35 |
| Piston cooling jet solenoid retaining bolt. | 11 | 8 |
| Gasoline Particulate Filter Differential Pressure Sensor | 9 | 7 |