LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> F-Pace R-Dynamic S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol PHEV -- F-Pace/X761) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2006487) >> Removal And Installation >> Rear Knock Sensor (G2031026) >> Installation

Rear Knock Sensor (G2031026): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the knock sensor.
    • Torque  : 20 Nm 
  2. Connect the electrical connector.
  3. Install the intake manifold.

    Refer to: INTAKE MANIFOLD - VEHICLES WITH: PHEV (G2756535) .

  4. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .

scientia non olet · About LEMON Manuals