LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> F-Pace R-Dynamic S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Starting System - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol PHEV -- F-Pace/X761) >> Starting System - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2006460) >> Removal And Installation >> Starter Motor (G1998287) >> Installation

Starter Motor (G1998287): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the starter motor.

    Torque  : 48 Nm 

  2. Connect the wiring harness.

    Torque  : 7 Nm 

    1. Connect the startup battery positive cable.

      Torque  : 12 Nm 

    2. Secure the cover.
  4. Install the catalytic converter.

    Refer to: CATALYTIC CONVERTER AND GASOLINE PARTICULATE FILTER ASSEMBLY - VEHICLES WITH: ROW SPECIFICATION

  5. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals