LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> F-Pace R-Dynamic S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Fuel Charging And Controls - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol PHEV -- F-Pace/X761) >> Fuel Charging And Controls - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2006450) >> Removal And Installation >> Fuel Rail (G2032604) >> Installation

Fuel Rail (G2032604): Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION: Make sure the threads are clean and free from fuel.
    • Lubricate the threads with silicone free lubricant.

      Material: Silicone Free Lubricant () 

    • Install the fuel rail pressure sensor.

      Torque  : 38 Nm 

  2. Install the fuel injectors.

    Refer to: FUEL INJECTORS (G1998238) 

  3. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT (G2623442)

  4. Bleed the fuel system and check for leaks.

    Refer to: FUEL SYSTEM BLEEDING

scientia non olet · About LEMON Manuals