Engine Coolant Degas Separator (G2046485): Removal
WARNING: This page is about a different variant/trim than selected.
WARNING:
Be prepared to collect escaping coolant
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING .
- Partially drain the cooling system.
Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING (G1998221) .
- See Figure
Release the 3 upper coolant hoses.
- See Figure
Release the 2 lower coolant hoses.
- See Figure
Remove the coolant degas separator.