Engine Cooling - V8 S/C 5.0L Petrol (G1580419): Specifications
WARNING: This page is about a different variant/trim than selected.
Lubricants
NOTE:
Coolant must be collected into a clean container and can be reused if not contaminated.
| DESCRIPTION | SPECIFICATION |
|---|---|
| Jaguar Premium Cooling System Fluid | WSS-M97B44-D |
| Jaguar Premium Cooling System Flush | EGR-M14P7-A |
CAPACITIES
| ENGINE | CAPACITY |
|---|---|
| 5.0L with supercharger | 12.32L |
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT | LB-IN |
|---|---|---|---|
| Coolant expansion tank retaining bolt | 9 | 80 | |
| Cooling fan motor and shroud retaining nuts | 9 | 62 | |
| Thermostat housing retaining bolt | 10 | 88 | |
| Coolant pump retaining bolts | 12 | 9 | |
| Radiator retaining bolts | 22 | 195 | |
| Radiator drain plug | 3.5 | 2.6 | 31 |
| Coolant bleed screw(s) | 2 | 18 | |
| Main block drain plug | 50 | 443 |