LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> F-Pace R-Dynamic S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Cooling - V8 S/C 5.0L Petrol -- F-Pace/X761) >> Engine Cooling - V8 S/C 5.0L Petrol (G1580419) >> Removal And Installation >> Coolant Expansion Tank (G2254546) >> Installation

Coolant Expansion Tank (G2254546): Installation

WARNING: This page is about a different variant/trim than selected.
    • Connect the electrical connector and hose to the coolant expansion tank.
    • Remove the hose clamp from the coolant hose.
    • Install the coolant expansion tank and bolt.
  2. Connect the coolant hose to the coolant expansion tank.
  3. CAUTION: Correct installation of the coolant expansion tank cap can be obtained by tightening the cap until 3 audible clicks are heard.

    Fill the coolant expansion tank to the 'MAX' level mark.

scientia non olet · About LEMON Manuals