Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control Module Cavity
- Circuit reference - O_V_5VCRS -
- Circuit reference - I_F_CRSPOS -
- Circuit reference - G_R_CRS -
- Monitor Description
- Monitors the PWM signal of the sensor. Detects wrong engine stop position, not plausible reverse rotation
- Prioritized List of Possible Causes
- Crankshaft position sensor loose
- Crankshaft position sensor circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Crankshaft position sensor to reluctor ring air gap too great
- Crankshaft position sensor failure