Auto Stop/Start Warning Indicator

To illuminate the auto stop/start warning indicator, the PCM  sends signals to the BCM  /GWM  through the FlexRay. The BCM  /GWM  transmits the message to the IPC  through the HS CAN HMI  systems bus.

Auto Stop/Start Warning Indicator - System Active 

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

The auto stop/start warning indicator illuminates green when the engine stops during an auto stop/start cycle, then extinguishes when the engine restarts.

Auto Stop/Start Warning Indicator - System Disabled 

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

The auto stop/start warning indicator illuminates white when the auto stop/start system is disabled.

Auto Stop/Start Warning Indicator - System Inhibit 

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

The auto stop/start warning indicator illuminates white when the auto stop/start system is active but a vehicle system requires the engine to run.