Instrument Panel Cluster Control Module - General Information

The warning indicators are mainly located in 3 groups:

• In the speedometer display
• In the tachometer display
• In a central position at the top of the message center.

The IPC  illuminates the warning indicators through signals from other system control modules and sensors. These signals are received by the IPC  on the High Speed (HS) Controller Area Network (CAN) Human Machine Interface (HMI) systems bus. Some indicators are activated by an external system control module but the IPC  contains the control logic.

The IPC  features a number of warning indicators. The warning indicators illuminate in 1 of 5 colors which indicate at the level of importance of the warning as follows:

• Red
• Amber
• Green
• Blue
• White.