Rear Wheel Bearing (G2187514): Installation

CAUTION: Make sure that these components are installed to the noted removal position.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Using the special tools and a hydraulic press, install the wheel bearing.

Special Tool(s): JLR-204-807, JLR-204-812

General Equipment: Hydraulic press
CAUTION: Make sure the circlip is seated in the groove correctly.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Install the circlip.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Using the special tools and a hydraulic press, install the wheel hub into the wheel bearing.

Special Tool(s): 204-726, JLR-204-836

General Equipment: Hydraulic press
Install the wheel knuckle.
Refer to: WHEEL KNUCKLE .
NOTE: Using Jaguar Land Rover approved equipment, check and if necessary adjust the wheel alignment. SRO must be claimed separately.

Check the 4 wheel alignment and adjust if required.

Refer to: WHEEL ALIGNMENT .