Rear Tie-Rod (G2187520): Installation

CAUTION: Make sure that new nut is installed.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Install the tie-rod.
- Install the bolt.
- Install and tighten the nut.
  Renew Part: Toe link nut Quantity: 1 .
  
  Torque
  
  Stage 1: 70 Nm
  
  Stage 2: 60°
CAUTION: Make sure that new nut and bolt are installed.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Install the bolt and the nut.
  Renew Part: Tie-rod nut and bolt Quantity: 1 .
- Tighten the nut.
  Torque
  
  Stage 1: 60 Nm
  
  Stage 2: 180°
NOTE: Using Jaguar Land Rover approved equipment, check and if necessary adjust the wheel alignment. SRO must be claimed separately.

Check the wheel alignment and adjust if required.

Refer to: WHEEL ALIGNMENT .