Connector details

WARNING: This page does not describe the selected car, but rather 34 other vehicles, including the 2023 Land Rover Range Rover Velar, 2023 Land Rover Range Rover Sport, 2023 Land Rover Range Rover Evoque, 2023 Land Rover Range Rover, and 2023 Land Rover Discovery Sport. However, it is still accessible from the selected car via links, so may be relevant.

Connector details comprises:

Connector Designation - The designated reference, prefixed 'C' or 'G' in the case of some ground connections.
CONNECTOR HOUSING SERVICEABLE - The part identified is available through the normal parts ordering process.
CONNECTOR HOUSING NOT SERVICEABLE - The part identified is not available.
Description - Usually derived from the component to which the connection is made.
Location - Used in conjunction with the photograph to indicate the location of the connector.
NOTE: References to the LH or RH side given in this document are made when viewing the vehicle from the rear.
Qualifier - For some connectors it is not possible to represent all possible conditions. An image may show a left-hand condition, the right-hand condition may be similar and is identified as such using a Qualifier, for example: LHD condition illustrated.
Location Image - Shows the location of the subject connector. For convenience, some images identify more than one connector.
NOTE: Images do not necessarily represent the optimum method for accessing a connector, always refer to the appropriate Service Repair Operation service information before attempting to access a connector.
Face View - An outline of the connector housing, viewed from the front, showing pin numbers (if applicable).
Part No. - The part number as it appears on the harness drawing (if applicable).
Color - If applicable, the color of the connector housing is shown. NATURAL is used to describe connectors with a clear/translucent plastic finish.
Cavities - Identifies the number of cavities within the connector.
Harness - Identifies the harness description (English only).
Wire Chart (Pin-out table) - A five column table, giving details of each wire within the connector: