Hood Latch Panel (G2172312): Installation

WARNING: This page is about a different car, the 2018 Jaguar E-Pace. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: This step requires the aid of another technician.
- Install the hood latch panel.
- Install and tighten the 4 bolts.
  Torque : 10 Nm
- Install and tighten the 4 nuts.
  Torque : 25 Nm
- Install and tighten the bolt.
  Torque : 10 Nm
- Install and tighten the 5 nuts.
  Torque
  
  M6: 10 Nm
  
  M8: 25 Nm
- Install and tighten the bolt.
  Torque : 10 Nm
Install the hood latches.
Refer to: HOOD LATCH .
Install the headlamp assembly.
Refer to: HEADLAMP ASSEMBLY .
Connect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .