LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> E-Pace Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - INGENIUM I4 2.0L Petrol -- E-Pace/X540 >> Engine Cooling - INGENIUM I4 2.0L Petrol (G2110286) >> Removal And Installation >> Charge Air Radiator (G2110297) >> Removal

Charge Air Radiator (G2110297): Removal

WARNING: Cooling fans may continue to operate after the engine is turned off. They may also start to operate after the engine is turned off and continue operating for up to 10 minutes.
CAUTION: Be prepared to collect escaping coolant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Raise and support the vehicle on a suitable 2 post lift.

    Refer to: LIFTING .

  2. Partially drain the engine cooling system.

    Refer to: Engine Cooling - INGENIUM I4 2.0L Diesel, General Procedures.

  3. Remove the condenser.

    Refer to: CONDENSER .

  4. Remove the air filter housing.

    Refer to: AIR FILTER HOUSING .

  5. G13895013Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Release the 2 coolant hoses from the charge air radiator.

  6. G13895014Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove the charge air radiator.