Auxiliary Radiator (G2473136): Removal
CAUTION:
Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
NOTE:
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- Raise and support the vehicle on a suitable 2-post lift.
Refer to: LIFTING .
- Remove the front bumper.
Refer to: FRONT BUMPER .
- Partially drain the engine cooling system.
Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .
-
CAUTION: Be prepared to collect escaping coolant.
- Disconnect the 2 engine coolant hoses.
- Remove the 2 bolts.
- Remove the nut.
- Remove the auxiliary radiator assembly.
- Remove the 2 bolts.
- Remove the auxiliary radiator.