Electric Park Brake Release When The Vehicle Has No Electrical Power (G2186306): Check

NOTE:

To be carried out in the event that the vehicle has no electrical power.
This procedure must be completed to the components on both sides of the vehicle.
This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Raise and support the vehicle on a suitable 2 post lift.
Refer to:LIFTING (G189141)
Remove the rear wheels and tires.
Refer to: WHEEL AND TIRE .
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Disconnect and release the wiring harness.
NOTE:
- Discard the O-ring seal.
- Discard the bolts.

G11308661

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove the electric park brake actuators.