Wheel Alignment Specification - Front comfort
CAUTION:
Both tie-rods must be rotated by an equal amount.
NOTE:
All figures are with vehicle at 'Showroom' ride height - full fluids, full tank of fuel, no occupants/luggage, tires inflated to normal pressures
| ITEM | UNITS | LEFT | RIGHT | TOTAL/BALANCE | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Camber | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | |
| Decimal degrees | -0.37° | ± 0.75° | -1.1270.38° | -0.37° | ± 0.75° | -1.12°/0.38° | 0.0° | ± 0.75° | -0.75°/0.75° | |
| Degrees/Minutes | -22' | ± 0.45' | -1°7'/23' | -22' | ± 0.45' | -1°7'/23' | 0' | ± 0.45' | -45'/45' | |
| Castor | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | |
| Decimal degrees | 7.17° | ± 0.75° | 6.42°/7.92° | 7.17° | ± 0.75° | 6.42°/7.92° | 0° | ± 0.9° | -0.90°/0.90° | |
| Degrees/Minutes | 7°10' | ± 0.45' | 6°25'/7°55' | 7°10' | ± 0.45' | 6°25'/7°55' | 0' | ± 0.54' | -54'/54' | |
| Toe | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | |
| Decimal degrees | - | - | - | - | - | - | 0.29° | ± 0.14° | 0.15°/0.43° | |
| Degrees/Minutes | - | - | - | - | - | - | 18' | ± 8' | 9'/26' | |