Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Removal steps in this procedure may contain installation details.
- Some illustrations may show the engine removed for clarity.
- Some variation in the illustrations may occur, but the essential information is always correct.
- Some illustrations may show vehicles without supercharger, but the essential information shown is always correct.
- Disconnect the battery ground cable.
Refer to: Battery Disconnect and Connect (General Procedures).
- Refer to: Supercharger (Removal and Installation).
- Refer to: Fuel Rail LH (Removal and Installation).
Torque Specification: 10 Nm