LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> XF SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 307 (Engine - INGENIUM I4 2.0L Diesel -- XE/(760) (2 Of 2)) >> Engine - INGENIUM I4 2.0L Diesel (G1817138) >> Removal And Installation >> Upper Timing Cover >> Installation

Upper Timing Cover: Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Make sure a new gasket is installed.
    G11309018Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Apply a 3 mm diameter bead of RTV sealant (Loctite 5970) to the Upper timing chain cover gasket in the position shown.

    Renew Part: Timing chain cover gasket  Quantity: 1  .

  2. NOTE: Take care when installing the Upper timing chain cover gasket.
    G11309019Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  3. CAUTION: Install the component in the sequence shown.
    G11309020Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Torque 

    Stage 1: 5Nm 

    Stage 2: 13Nm 

    Stage 3: Loosen: 180° 

    Stage 4: 13Nm 

  4. To install, reverse the 4. removal procedure.
scientia non olet · About LEMON Manuals