LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> XF SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 307 (Engine - INGENIUM I4 2.0L Diesel -- XE/(760) (2 Of 2)) >> Engine - INGENIUM I4 2.0L Diesel (G1817138) >> Removal And Installation >> Lower Timing Chain >> Removal

Lower Timing Chain: Removal

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

  2. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  3. Remove the charge air cooler.

    Refer to: CHARGE AIR COOLER

  4. Remove the upper timing cover.

    Refer to: UPPER TIMING COVER 

  5. Remove the lower timing cover.

    Refer to: LOWER TIMING COVER 

  6. CAUTION: Make sure the camshaft timing marks are positioned as illustrated.
    G11309156Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Using the special crankshaft pulley tool, rotate the crankshaft until the camshaft locking tool can be installed.
    • Special Tool(s): JLR-303-1630 
    • Special Tool(s): JLR-303-1625 
  7. G11309157Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Torque  : 10Nm 

  8. G11309158Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Rotate the crankshaft counter-clockwise.

      Special Tool(s): JLR-303-1630 

    • Install the 2 bolts.
  9. NOTE: The timing chain will not be under tension in the positions illustrated.
    G11309159Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  10. CAUTION: Use 2 suitable M6 X 20 bolts to install the special tool to the cylinder head.
    G11309160Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Special Tool(s): JLR-303-1631 
    • Torque  : 10Nm 
  11. G11309161Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Loosen, but do not fully remove the bolt.

  12. G11309160Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Remove the special tool.
    • Special Tool(s): JLR-303-1631 
  13. G11309163Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove and discard the hydraulic timing chain tensioner.

  14. G11309195Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove and discard the timing chain guide.

  15. G11309164Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Remove the camshaft sprocket.
    • Discard the bolt.
  16. G11309197Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove and discard the timing chain guide.

  17. G11309198Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove the timing chain.

  18. NOTE: The timing chain will not be under tension in the positions illustrated.
    G11309199Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  19. G11309200Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove and discard the hydraulic timing chain tensioner.

  20. G11309201Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove and discard the timing chain guide.

  21. G11309202Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove and discard the timing chain guide.

  22. G11309203Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  23. G11309204Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove and discard the timing chain guide.

  24. G11309205Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove the timing chain.