5-Way Manifold (G2328361): Removal
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING
- Drain the cooling system.
Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING
- Remove the intake air resonator.
Refer to: INTAKE AIR RESONATOR
-
CAUTION: Be prepared to collect escaping coolant.
Disconnect the 5 pipes from the 5-way manifold.
- Remove the bolt.
- Remove the fastener.
- Remove the 5-way manifold bracket assembly.