FLEXPLATE (G1817162): Installation

WARNING: This page is about a different car, the 2019 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Under no circumstances should the flexplate retaining bolts be inserted into the crankshaft with the flexplate removed. Failure to follow this instruction will result in damage to the engine.

NOTE: Do not insert the bottoming tap more than the depth of the threaded holes (16 mm). Apply tape to the bottoming tap 16 mm from the end as a visual guide.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
CAUTION:
- Using a suitable bottoming tap, clean out the threads.
- Using suitable brake cleaner, remove any foreign material from the threads.
NOTE: The flexplate will only locate in one position.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Renew Part: Flexplate bolts Quantity: 8 .
  Torque
  
  Stage 1: 30 Nm
  
  Stage 2: 120°
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Special Tool(s): JLR-303-1630
Refer to: TRANSMISSION - TDV6 3.0L DIESEL
Lower the vehicle.