Wheel Alignment Specification - Front increased ground clearance
CAUTION:
Both tie-rods must be rotated by an equal amount.
NOTE:
All figures are with vehicle at 'Showroom' ride height - full fluids, full tank of fuel, no occupants/luggage, tires inflated to normal pressures
| ITEM | UNITS | LEFT | RIGHT | TOTAL/BALANCE | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Camber | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | |
| Decimal degrees | 0.05° | ± 0.75° | -0.70°/0.80° | 0.05° | ± 0.75° | -0.70°/0.80° | 0.0° | ± 0.75° | -0.7570.75° | |
| Degrees/Minutes | 3' | ± 0.45' | 0°42'/48' | 3' | ± 0.45' | 0°42'/48' | 0' | ± 0.45' | -45'/45' | |
| Castor | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | |
| Decimal degrees | 6.94° | ± 0.75° | 6.1977.69° | 6.94° | ± 0.75° | 6.19°/7.69° | 0° | ± 0.9° | -0.90°/0.90° | |
| Degrees/Minutes | 6°57' | ± 0.45' | 6°12'/7°42' | 6°57' | ± 0.45' | 6°12'/7°42' | 0' | ± 0.54' | -54'/54' | |
| Toe | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | |
| Decimal degrees | - | - | - | - | - | - | 0.30° | ± 0.14° | 0.16°/0.44° | |
| Degrees/Minutes | - | - | - | - | - | - | 18' | ± 8' | 10'/26' | |