LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Supercharger Cooling - V6 S/C 3.0L Petrol -- XE (X760)) >> Supercharger Cooling - V6 S/C 3.0L Petrol >> Coolant Pump (G1829880) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the coolant pump.

    Torque Specification: 9 Nm 

  2. Connect the 2 coolant hoses.
    • Connect the coolant pump electrical connector.
    • Install the 2 wiring harness clips.
  4. Install the left air cleaner outlet pipe.

    Refer to: Left Air Cleaner Outlet Pipe .

  5. Install the left air cleaner.

    Refer to: Left Air Cleaner .

  6. Fill the cooling system.

    Refer to: Cooling System Draining and Vacuum Filling .

  7. Connect the startup battery ground cable.

    Refer to: Battery Disconnect and Connect .

scientia non olet · About LEMON Manuals