LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Transmission/Transaxle Cooling - INGENIUM I4 2.0L Diesel, Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD -- XE (X760)) >> Transmission/Transaxle Cooling - INGENIUM I4 2.0L Diesel, Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Transmission Fluid Cooler - INGENIUM I4 2.0L Diesel (G1817252) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
  • Be prepared to collect escaping fluids.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  1. Refer to: Transmission Fluid Drain And Refill (G1867746) .
  2. Refer to: Cooling System Draining and Vacuum Filling .
  3. G11292360
  4. G11292361
G11292362

Torque Specification: 5 Nm 

scientia non olet · About LEMON Manuals