LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Fuel Charging & Controls - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Fuel Charging And Controls - INGENIUM I4 2.0L Petrol >> Fuel Rail (G2032604) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure threads are clean and free from petrol.

    Install the fuel rail pressure sensor. Lubricate the threads with

    Molykote W15.

    Torque Specification: 38 Nm 

  2. Install the fuel injectors.

    Refer to: Fuel Injectors .

  3. Connect the startup battery ground cable.

    Refer to: Battery Disconnect and Connect (General Procedures).

scientia non olet · About LEMON Manuals