Rear Stabilizer Bar Bush (G1917532): Removal

NOTE:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.
This procedure contains illustrations for left side components, right side components are similar.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING
Remove the rear shock absorber.
Refer to: REAR SHOCK ABSORBER
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove and discard the 2 bolts and remove the stabilizer bar bracket.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove the stabilizer bar bush.
Repeat the procedure for the other side of the vehicle.