Rear Stabilizer Bar (G1818217): Installation

• Install the rear stabilizer bar bushes.
• Install the rear stabilizer bar brackets.

• Install the rear stabilizer bar to the rear subframe.
• Install and tighten 4 new rear stabilizer bar bracket bolts.

  Renew Part: Rear stabilizer bar to subframe bolts  Quantity: 4 

  Torque  : 60 Nm 

• Install and tighten 2 new rear stabilizer bar link nuts.

  Renew Part: Stabilizer bar link upper nut  Quantity: 2. 

  Torque  : 48 Nm 

Refer to: REAR SUBFRAME (G1817271)