Air Line Connector - SPORTBRAKE (G2138509): Repair
CAUTION:
- Make sure the correct size and type of air line connector is installed.
- Do not reuse the air line connector. Always install a new air line connector every time it is released.
NOTE:
Make sure that the component is clean, free of foreign material and lubricant.
-
CAUTION:
- Using a suitable tool, remove the collet as illustrated. Attempting to slide the collet from the air line will result in damage.
- Make sure the air lines are not damaged.
Use a suitable tool to remove the air line connector collet from the air line.
Remove and discard the air line connector.
Renew Part: Air line connector(s) Quantity: 1.
Install and fully tighten the new air line connector to the correct components torque.
Refer to: SPECIFICATIONS
Remove the cap.
-
CAUTION: Make sure that the component is clean, free of foreign material and lubricant.
Connect the air line.