LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Engine - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Engine - INGENIUM I4 2.0L Petrol >> Crankshaft Front Seal >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Take extra care not to damage the seal.

    Using a suitable tool, install the front crankshaft oil seal.

    Special Tool(s):  JLR-303-1628

    Torque Specification: 26 Nm 

  2. Install the crankshaft damper.

    Refer to: Crankshaft Pulley .

  3. Connect the battery ground cable.

    Refer to: Battery Disconnect and Connect .

scientia non olet · About LEMON Manuals