LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Transfer Case - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD -- XE (X760)) >> Transfer Case - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Transfer Case Front Output Seal >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

  1. G11314271

    Using the special tools install a new front output seal.

    Special Tool(s): 307-520, JLR-307-696 

    Renew Part: Transfer case front output shaft oil seal. 

  2. G11314268

    Install a new circlip.

    Renew Part: Fuel pump O-ring seal. 

  3. G11314267

    Install the drive flange.

  4. CAUTION: Make sure that new bolts are installed.
    G11314274

    Install the driveshaft to flange bolts.

    Renew Part: Driveshaft to front output flange bolts. 

    Torque Specifications  :

    Stage 1: 40 Nm 

    Stage 2: 90° 

G11314275

A new breather vent must always be installed.

Renew Part: Breather. 

Vehicles with V6 3.0L engine 

  1. Install the exhaust system, refer to: EXHAUST SYSTEM - V6 S/C 3.0L PETROL .

All vehicles 

  1. Fill the transfer case, refer to: Transfer Case Draining and Filling .
scientia non olet · About LEMON Manuals