DTC P0106-62: Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Range/Performance - Signal compare failure: Action
WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the electrical circuit diagrams and check the manifold absolute pressure and temperature sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Check and install a new manifold absolute pressure and temperature sensor as required
- Check air filter is serviceable
- Check intake manifold for air leak (loose or missing component)
- Check breather system for leak (loose or missing component)
- Check electric throttle blade for contamination by oil or debris clean as required
- Check for damaged/restricted exhaust system
- Using the manufacturer approved diagnostic system, clear all stored DTCs and retest