LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Engine Cooling - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Engine Cooling - INGENIUM I4 2.0L Petrol >> Engine Coolant Degas SEPERATOR (G2046485) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the coolant degas separator.

    Torque Specification: 12 Nm 

  2. Connect the 2 lower coolant hoses.
  3. CAUTION: Inspect the seals and renew the components if damaged or worn.

    Connect the 3 upper coolant hoses.

  4. Fill and bleed the cooling system.

    Refer to: Cooling System Partial Draining and Vacuum Filling .

scientia non olet · About LEMON Manuals