LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Transmission/Transaxle Cooling - Vehicles With 8HP45 8 - Speed Automatic TRANSMISSIONAWD/8HP45 8 - Speed Automatic Transmission RWD/8HP70 8 - Speed Automatic Transmission AWD -- XE/(760)) >> Transmission/Transaxle Cooling - INGENIUM I4 2.0L Petrol, Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD (G1862975) >> Removal And Installation >> Transmission Fluid Cooler Pipes - INGENIUM I4 2.0L Petrol (G1817253) >> Installation

Transmission Fluid Cooler Pipes - INGENIUM I4 2.0L Petrol (G1817253): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transmission cooler tubes.
  2. CAUTION: Install new O-ring seals.
    • Install new O-ring seals to the transmission cooler tubes.

      Renew Part: Transmission fluid cooler tubes to transmission O-ring seals  Quantity: 1. 

    • Install and tighten the bolt securing the transmission fluid cooler tubes to the transmission assembly.

      Torque  : 22Nm 

  3. Install and tighten the bolt securing the transmission fluid cooler tubes to the oil pan assembly.

    Torque  : 11Nm 

  4. Install the 2 transmission cooler tubes to the transmission cooler assembly.
    • Install the front left lower fender splash shield.
    • Install the 3 clips securing the lower fender splash shield to the vehicle body.
  6. Fill the transmission fluid.

    Refer to: TRANSMISSION FLUID DRAIN AND REFILL

  7. Lower the vehicle.
scientia non olet · About LEMON Manuals