DTC P26DB-13: Engine Sound Control "A" Circuit/Open - Circuit open: Action
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the Diagnostic Trouble Code(s)
- Using the Jaguar Land Rover approved diagnostic equipment, check and update the car configuration file as necessary. Clear the Diagnostic Trouble Code(s) and retest
- Refer to the electrical circuit diagrams and check the active sound design signal circuit for open circuit, high resistance. Repair the wiring harness as necessary