LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 239 (Transmission/Transaxle Cooling - INGENIUM I4 2.0L Diesel Vehicles With: 8H 8-Speed Automatic Transmission AWD/8HP45 8 - Speed Automatic Transmission RWD/ 8HP70 8-Speed Automatic Transmission AWD -- XE/(760)) >> Transmission/Transaxle Cooling - INGENIUM I4 2.0L Diesel, Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD/8HP70 8-Speed Automatic Transmission AWD (G1862975) >> Removal And Installation >> Transmission Fluid Cooler Pipes - INGENIUM I4 2.0L Diesel (G1817253) >> Installation

Transmission Fluid Cooler Pipes - INGENIUM I4 2.0L Diesel (G1817253): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transmission cooler tubes.
  2. CAUTION: Install new O-ring seals.
    • Install new O-ring seals to the transmission cooler tubes.

      Renew Part: Transmission fluid cooler tubes to transmission O-ring seals  Quantity: 1. 

    • Install and tighten the bolt securing the transmission fluid cooler tubes to the transmission assembly.

      Torque  : 22Nm 

  3. Install and tighten the bolt securing the transmission fluid cooler tubes to the oil pan assembly.

    Torque  : 11Nm 

  4. Install the 2 transmission cooler tubes to the transmission cooler assembly.
    • Install the front left lower fender splash shield.
    • Install the 3 clips securing the lower fender splash shield to the vehicle body.
  6. Fill the transmission fluid.

    Refer to: TRANSMISSION FLUID DRAIN AND REFILL

  7. Lower the vehicle.
scientia non olet · About LEMON Manuals