DTC P0505-22: Idle Control System - Signal amplitude > maximum: Action
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicle Conditions to enable DTC Logging Strategy
- Idle warm engine, operate PAS and AC
- Prioritised Checks to Perform
- Check the intake system for restrictions. Rectify as necessary
- Check the integrity of the supercharger belt. Install a new supercharger belt as necessary
- Check front end accessory drive belt and driven components for overload failure or seized
- Check power steering pump for overload, failed or seized component