DTC U0415-41: Invalid Data Received From Anti-Lock Brake System (ABS) Control Module - General checksum failure: Action
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicle Conditions to Enable DTC Setting Strategy
- Ignition on, engine running
- Prioritized Checks to Perform
- Refer to the electrical circuit diagrams and check the anti-lock brake system control module power and ground circuits for open circuit, high resistance. Repair the wiring harness as necessary
- Refer to the electrical circuit diagrams and check the FlexRay network circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the antilock brake system control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC index
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Anti-Lock Brake System Control Module (ABS)/Update ECU