DTC U0404-41: Invalid Data Received From Gear Shift Control Module "A" - General checksum failure: Action
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Prioritized Checks to Perform
- Transmission control switch power or ground circuit open circuit, high resistance
- High speed CAN bus (powertrain) circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Refer to the electrical circuit diagrams and check the FlexRay bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Replace the wiring harness as necessary
- Transmission control switch fault