LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Engine V6 S/C 3.0L Petrol -- XF/(X260) (2 Of 2)) >> Engine - V6 S/C 3.0L Petrol (G2289428) >> Removal And Installation >> FLEXPLATE - Fwd (G1896064) >> Installation

FLEXPLATE - Fwd (G1896064): Installation

WARNING: This page is about a different car, the 2020 Jaguar XF and 2019 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION:
    • Install all the bolts finger tight before final tightening.
    • The bolts can only be used 3 times, mark the bolts with a center punch. If 2 punch marks are visible, discard the bolts.
    • Install the bolts in the noted position.
    NOTE:
    • Make sure the crankshaft and flexplate mating faces are clean before installation.
    • Make sure that the crankshaft is not rotated.
    • Tighten the retaining bolts working diagonally.
    G11286688Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Special Tool(s): JLR-303-1304 

    Renew Part: Flywheel bolts  Quantity: 1  .

  2. Refer to: TRANSMISSION - V6 S/C 3.0L PETROL
scientia non olet · About LEMON Manuals