Electric Park Brake (ERB) Switch
| ITEM | DESCRIPTION |
|---|---|
| 1 | Release Electronic Park Brake (EPB) |
| 2 | Apply Electronic Park Brake (EPB) |
The resistive ladder-type EPB switch has four hardwired connections with the ABS control module. These connections are two apply circuits and two release circuits. This allows the ABS control module to make a plausibility check on each EPB switch selection.
The EPB switch is located in the floor console behind the gear selector. The EPB is manually applied and released using the EPB switch. Pulling the switch lever up applies the EPB. Pushing the switch lever down releases the EPB.