Wheel Hub (G22248834): Installation

CAUTION: Make sure that the wheel bearing is installed to the position noted in the removal steps. If this instruction is not followed the Anti-Lock Brake System (ABS) might not function properly.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Using the special tools JLR-204-807 and JLR-204-812 install a new wheel bearing.

Special Tool(s) : JLR-204-807, JLR-204-812

General Equipment : Hydraulic press

Renew Part: Wheel hub bearing(s) Quantity: 1
CAUTION: Make sure that the circlip is correctly seated in the wheel knuckle.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Install a new circlip.

Renew Part: Circlip Quantity: 1
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Using the special tools JLR-204-726 and JLR-204-836 install the wheel hub.

Special Tool(s) : JLR-204-726, JLR-204-836

General Equipment : Hydraulic press
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Inspect the wheel hub and bearing assembly for correct operation.
Install the rear wheel knuckle.
Refer to: WHEEL KNUCKLE - VEHICLES WITH: COIL SUSPENSION .

Refer to: WHEEL KNUCKLE - VEHICLES WITH: AIR SUSPENSION .