Rear Stabilizer Bar (G2214469): Removal

CAUTION: This procedure can only be completed after the vehicle has been powered down by an approved person.

NOTE:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

WARNING: Jaguar Land Rover Electric Vehicle Competent Person (EVCP) trained technicians only.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

This procedure involves work on components associated with the High Voltage (HV) system. Only technicians qualified to EVCP level or higher are allowed to perform this procedure . It is mandated that all technicians involved with the steps in this procedure have read and understood the Electric Vehicle Safety Rules.

Refer to: ELECTRIC VEHICLE SAFETY RULES .
Raise and support the vehicle on a suitable 2 post lift.
Refer to: JACKING AND LIFTING .
Remove the rear subframe.
Refer to: REAR SUBFRAME - REMOVE FOR ACCESS .
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove the rear stabilizer bar.