LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> I-Pace S >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation -- I-Pace/X590 >> Hydraulic Brake Actuation (G2244774) >> Removal And Installation >> Brake Pedal And Bracket (G2214059) >> Installation

Brake Pedal And Bracket (G2214059): Installation

  1. Install the brake pedal and bracket.

    Torque  : 25Nm 

  2. Install a new brake pedal retaining pin.

    Renew Part: Brake booster to brake pedal pin  Quantity: 1  .

  3. Secure the 2 wiring harness clips.
  4. Install the brake pedal switch.

    Refer to: BRAKE PEDAL SWITCH .

  5. Connect the 12V system.

    Refer to: 12V SYSTEM DISCONNECT .

    • Using the Jaguar Land Rover (JLR) diagnostic equipment, the following sequence must be followed.

      General Equipment: Jaguar Land Rover approved diagnostic equipment 

    1. 'On Demand Self-Test'.
    2. 'Pedal Force Runout'.
    3. 'Exit Control Module Manufacturing Service Mode'.
scientia non olet · About LEMON Manuals