Instrument Panel Lower Trim Panel (G2217803]: Installation
-
NOTE: Only do this step if previously removed.
- Install the Electric Park Brake (EPB) switch.
- Install and tighten the 4 screws.
Torque: 2Nm
-
- Install the instrument panel lower trim panel.
- Connect the 4 electrical connectors.
- Install and tighten the 6 screws.
Torque: 4Nm
- Secure the diagnostic connector.
-
- Install the center console trim panel.
- Connect the 2 electrical connectors.
- Secure with the 6 clips.
- Install the driver side face vent.
Refer to: DRIVER SIDE VENT .