Transfer Case Rear Output Seal (G2046569): Installation

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Using the special tool, install a new input shaft seal.

Special Tool(s): JLR-307-695 , 307-520
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Apply a 3 mm diameter bead of Loctite 648 or equivalent meeting Jaguar specification to the halfshaft.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Using the special tool install the new seal and nut.

Renew Part: Transfer case rear output shaft flange nut Quantity: 1 .

Renew Part: Transfer case rear output shaft oil seal Quantity: 1 .
Install the driveshaft.
Refer to: DRIVESHAFT - INGENIUM I4 2.0L PETROL .
Check the transfer box fluid level.
Refer to: TRANSFER CASE FLUID LEVEL CHECK .