Transfer Case Front Output Seal (G2046574): Removal

NOTE:

This procedure contains illustrations showing certain components removed to provide extra clarity.
This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.

Raise and support the vehicle using a suitable 2 post lift.
Refer to: LIFTING .
Drain the transfer case.
Refer to: TRANSFER CASE DRAINING AND FILLING .
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove the flange.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove and discard the circlip.
WARNING: Be prepared to collect escaping oil.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Carefully remove and discard the oil seal.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Clean the seal register and thoroughly inspect for damage.