Transfer Case Bush (G1895648): Removal
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
- Disconnect the battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .
- Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING .
- Remove the transfer case.
Refer to: TRANSFER CASE .
Using the special tools, press out and discard the transfer case bush.
Special Tool(s): JLR-205-1004 , JLR-307-697
Clean all the mating faces thoroughly and check for damage.